PMA Auto Works

BYD Service Melbourne

BYD Service Melbourne

BYD has gone from relative newcomer to one of the best-selling electric vehicle brands in Australia in a remarkably short period of time. Across Melbourne and the eastern suburbs, BYD vehicles are becoming a regular sight — and owners are starting to ask the same question: where do you take a BYD for servicing outside of the dealer network?

PMA Auto Works in Ringwood services BYD vehicles for owners across Melbourne who want a local, qualified, and straightforward alternative to dealership servicing.

    Upload Your Photos or Videos

    Independent BYD Servicing Melbourne

    BYD’s dealer network in Melbourne is still developing, which means wait times and inconvenience are real issues for many owners. For routine maintenance — the regular items that keep your BYD running as it should — an independent workshop is a practical choice that doesn’t compromise on quality.

    Under Australian Consumer Law, you have the right to have your BYD serviced by a qualified independent mechanic without voiding the manufacturer’s warranty, provided the correct parts and procedures are used. We carry out BYD servicing to manufacturer specifications, keep a clear service record, and use quality parts suited to each model.

    BYD Models We Service

    BYD’s Australian lineup has expanded quickly, and we work across the full current range.

    The Atto 3 is BYD’s most popular model in Australia and one of the top-selling EVs in the country. It’s a compact SUV with a 60.5 kWh or 49.9 kWh battery depending on the variant, and a well-sorted interior that’s won over a lot of Melbourne buyers. Routine maintenance includes tyre rotations and alignment, cabin air filter replacement, brake fluid, 12V battery checks, and suspension inspections.

    The Seal is BYD’s mid-size sedan, available in rear-wheel drive and all-wheel drive variants. It sits on BYD’s e-Platform 3.0 with a blade battery and uses cell-to-body construction, making it a genuinely modern piece of engineering. Maintenance requirements follow a similar schedule to the Atto 3, with particular attention to tyre wear on the Performance AWD variant given its higher torque output.

    The Dolphin is BYD’s smaller, more affordable entry point into the Australian EV market. Compact and efficient, it’s popular with city drivers and first-time EV buyers across Melbourne. Despite its smaller footprint, it still requires the same regular attention — cabin filter, brake fluid, tyres, 12V battery — and we service Dolphin owners at our Ringwood workshop.

    The Sealion 6 is BYD’s plug-in hybrid SUV, combining a petrol engine with an electric motor and a rechargeable battery. It requires servicing across both systems — the combustion engine needs oil changes, filters, and ignition components, while the electric side needs battery checks, brake system inspection, and thermal management attention. For more detail on what plug-in hybrid servicing involves, visit our PHEV Service & Repairs page.

    The Shark is BYD’s plug-in hybrid ute, which has generated significant interest since arriving in Australia. With a PHEV drivetrain in a ute body, it’s a different kind of vehicle to anything else in the BYD range. We service the Shark for routine maintenance across both the electric and petrol systems.

    What's Included in a BYD Service

    A BYD service at PMA Auto Works covers the key maintenance items that keep your vehicle in good condition and your warranty protected.

    tyre

    Tyre rotation and replacement

    BYD vehicles carry significant battery weight, which affects tyre wear patterns. Regular rotations extend tyre life and help maintain even wear across all four corners. We also supply and fit tyres suited to BYD models.

    wheel-alignment

    Wheel alignment

    Correct alignment is important on any EV. The weight distribution of BYD’s blade battery platform means misalignment can accelerate tyre wear and affect handling. We carry out laser-guided wheel alignments on all BYD models.

    brake

    Brake fluid replacement

    BYD recommends brake fluid replacement as part of the regular service schedule. Even though regenerative braking reduces how often the physical brakes are used, moisture still builds up in the brake fluid over time. We carry out full brake fluid flushes and top-ups.

    cabin

    Cabin air filter replacement

    The cabin filter cleans the air coming into the interior through the climate system. BYD recommends replacing it at regular intervals, and a blocked filter can reduce airflow and affect HVAC performance noticeably.

    high-voltage

    12V auxiliary battery

    Like all electric vehicles, BYD models carry a small 12V battery that powers the car’s electronics, lighting, and accessories. It’s separate from the main drive battery and needs to be tested and replaced when it deteriorates.

    damper (1)

    Suspension inspection and repairs

    Control arms, bushings, ball joints, and wheel bearings all wear over time, and the weight of BYD’s battery packs means suspension components can see higher loads than on lighter petrol vehicles. We inspect and replace suspension components across the BYD range.

    car

    Brake system inspection

    Regenerative braking is efficient, but the physical brakes still need to be inspected. Rotors and pads that aren’t used regularly can corrode, and caliper operation needs to be checked to make sure everything is moving freely.

    check

    Diagnostic scan

    We use professional diagnostic tools to read fault codes and check system health across BYD’s electrical and mechanical systems. This is included as part of every service visit.

    Logbook Servicing for BYD

    We carry out logbook servicing for BYD vehicles in line with the manufacturer’s schedule. Keeping your logbook up to date matters for warranty compliance and resale value, and you do not need to go back to the dealer to have it stamped. A qualified independent mechanic using the correct parts and procedures satisfies the requirements under Australian Consumer Law.

    Roadworthy Certificates for BYD

    If you’re selling your BYD or need to re-register it, we can carry out the roadworthy inspection and issue a Roadworthy Certificate (RWC) in Victoria. Our team understands the BYD platform well enough to carry out a thorough inspection across both the conventional mechanical components and the EV-specific systems.

    Also Servicing Other Electric Vehicles in Melbourne

    BYD is one of many EV and PHEV brands we work on at our Ringwood workshop. For a full overview of our electric vehicle servicing, visit our EV Service & Maintenance page. We also have dedicated pages for Tesla Service , Polestar Service , Hyundai EV Service, Kia EV Service, BMW EV Service, and more.

    Serving BYD Owners Across Melbourne’s East

    Our workshop is at 4–6 Yallourn Parade, Ringwood — easy to reach for BYD owners across Doncaster, Nunawading, Mitcham, Vermont, Croydon, Wantirna, Blackburn, Burwood, and the broader Melbourne east. We’re open Monday to Friday 8am–5:30pm and Saturday 8am–3pm, with Sunday appointments available on request.

    Book You BYD Service

    Call us on (03) 8838 0594 or book online to arrange your BYD service, inspection, or repair. Our team is happy to answer any questions about your model before you come in.

    Frequently Asked Questions

    Will servicing my BYD at PMA Auto Works void my warranty?

    No. Under Australian Consumer Law, having your vehicle serviced by a qualified independent mechanic does not void the manufacturer’s warranty, as long as the correct parts and service procedures are followed. We carry out BYD servicing to manufacturer specifications and keep a full service record for your vehicle.

    BYD recommends servicing at 12-month or 20,000 km intervals, whichever comes first, for most models. The exact schedule varies slightly between the Atto 3, Seal, Dolphin, and PHEV models like the Sealion 6 and Shark. We can advise on the correct interval for your specific vehicle when you book.

    Yes. The Sealion 6 and Shark are plug-in hybrids, and we service both. PHEV servicing covers the combustion engine and the electric drivetrain. More detail is available on our PHEV Service & Repairs page.

    Yes, booking ahead is recommended. Call us on (03) 8838 0594 or use the online booking form to secure a time that suits you.